Orders Update – Feb 14th 2021.

Feb 14th 2021: Hello!

As you would all know know we had a medical issue with our 6 month old daughter in hospital and my wife by her side for the past two months now, we are hoping they may be able to come home this week on Wednesday at this stage as she seems to be responding to treatment and is trending in the right direction.

Here is a detailed update as to what is happening with all orders currently:

All hard leather items such as cuffs, all gags, and leather harness items will be completed this coming week for all current orders and will be either shipped or put aside while other order items are completed, Most of these are already done, I have been working on these myself over the weeks and I am nearly done here, we have produced over 100 gags in the past few weeks.

If there are enough of these hard leather items in larger orders I will be contacting you asking if you would like me to partially ship your order while we wait for soft leather items to be completed.

Soft leather, Hoods, Armbinders and Mittens are the items that will take a little longer, I have laser cut all the hoods pieces right now ready to go, there are about 130 hoods waiting to be stitched and glued, we anticipate my wife and daughter may be able to come home this Wednesday, which means these can finally start to be finished. Once she starts, all 130 hoods will be able to ship within a week or so, staggered as they are completed. Armbinders and mittens will also be amongst these.

Again I should thank you all for your incredible patience, we are nearly there it seems, if they come home on Wednesday, to me it seems reasonable that all due orders will be shipped inside the next couple weeks. Pausing our Etsy store while this all happens has actually been a good thing, when we make it through the next couple weeks and all orders are shipped we will be able to lower the manufacturing timeline to only a few weeks moving forward, or even less, our new machinery, laser cutter, gluing machine, folding machine makes it possible to actually keep stock of a number of items, its our goal to be able to instantly ship some product such as gags and our hoods. After black Friday our queue got up to 300 orders deep, which was fine and took us approx 6 weeks give or take a week or so to work through, but that’s not particularly ideal permanantly, which made this even more difficult when our daughter suddenly got sick 2 weeks later and just before Christmas.

We hope you could continue to allow us some kind leniency with late orders at the moment while we work through them all. We are shipping particularly overdue orders with express shipping (Hoods price point and above) to make up for the delay on our part.

Hopefully this gives some solid insight into where we are at right now, and that there is a clear path to having all orders fulfilled very soon.

If you have emailed us with a question, expect a personal reply shortly.

Thank you!

Read More

Orders Update 21 Jan 2021.

Hello everyone!

Thanks for your extreme patience while we have a medical issue with our little girl in hospital. She has been admitted 3 times over the past 5 weeks, currently she is still admitted getting treatment for extremely rare and bad case of bullous pemphigoid (for those interested), and seems to finally be responding well after a couple relapses, my wife Mina is obviously with her during this whole time. I have been at home working on what orders I can manage and looking after our other child, while she is the sewing master I have been working on hard leather items, gags and cuffs etc, and shipping what I could.

Both the girls should be home over the weekend and orders made from soft leather should start rapidly be completed over the course of the coming week and should start shipping through that week.

I want to really thank all of you for your extreme patience. I am doing everything I can here to prepare for her to be able to just get home and do some sewing after a short rest, but we want you all to know this is our primary jobs, both of us, it keeps the roof over all our heads and we take it very seriously, to that end, we really ask for just a little more patience while we get your orders out as promptly as we can. We want to avoid an avalanche of refunds as this could put us in a very bad place, we have all hardware, materials and such to complete every single order we currntly have, so please allow us the time to complete them.

Our new laser cutter has been a godsend so far, we can cut all our patterns, gag straps etc, eyelet holes using it so it has been able to save us considerable time while also making the cuts perfect every time.

p.s. your messages of encouragement and concern over this time has been very much noticed and we seriously appreciate this.

Thank You!!

Read More

Regarding Current Customer Orders Delayed Approx 1 week.

Hello everyone,

We just wanted to drop a note to let everyone know that we had a setback over the Christmas period, our 4 m/o baby daughter was in and out of hospital a couple of times over the last few weeks with a pretty serious skin condition out of nowhere which essentially resembles blistering burns all over her whole body, as you can imagine this requires our full and undivided attention in the short term and still does although she is home now.  The condition is not permanent disability, so treatment should bring remission of the issue,  As a result obviously all work had stopped while she was in hospital before Christmas and re-admitted last week, and we were with her essentially 24/7 during this time. She is home now and slowly improving, but does still require constant care from my wife, and this means that work has slowed to a trickle with regards to customer orders.

Since we are home now we will be resuming orders outstanding and sending them out as soon as is possible on this end. We dont anticipate a huge delay from this point on, probably up to an additional week from this point of time wherever you are in the manufacturing queue late or not. This means, if you have a currently late order, we do apologise but its likely to take up to an additional week to ship your order, if you are 4 weeks into the 6 week manufacturing time line, there may be an additional week there too, I hope this makes senses. We do always have around 200+ orders in our queue and this has been the case for the last few years now, so we do always require pretty much the entire 6 weeks to work though orders placed, thanks for being extra patient with us during this time.

On a positive note, we have taken steps over the past month or so to increase our work-flow efficiency with the goal of being able to get to the point where we actually carry in stock items. This means we have had to source new silicone ball suppliers in which we can carry thousands of balls in stock at any given time to essentially never have the issue of waiting up to 1 month each time we order a shipment of balls, in the short term it means we restricted the ball colours to Red, Black and Pink until we can slowly introduce new colours again (since we need to buy nearly 1000 of each colour). We have also just acquired a large CNC laser cutting machine which can perfectly cut all our patterns, gag straps, eyelet holes etc with incredible repeatability and precision, all this will be saving us considerable time during the manufacturing process moving forward and effectively bringing that wait time down as close to zero as possible.

Any new orders placed in the past week or two are unlikely to see any delay.

Thanks very much for your understanding and support. Please allow us the short extra time to get your orders shipped as efficiently as we can get to them.

Cheers. RS.

Read More

Yes, we are still open for business!

Hello everyone,

We just wanted to let everyone know that we are very much still open for business as normal here with regards to our bondage gear store. We are very fortunate that we can work completely from home in our business and will continue to do so during these times. Our supply chains also remain open, and we are stocking up on materials we need in case they do need to close to make sure we can service all orders.

Just a reminder that our processing time is between 4-6 weeks, and always has been, so nothing new in this regard.

Postal services are largely uninterrupted, and should continue to be that way since they are known world wide as essential services. You may see some small delay in the actual postage transit times though, but that is to be expected given the more scrutinised screening processes going on around the world.

We hope you are all practising safe social distancing, and generally staying home when you can in this terrible time.

Mina and family are safe, thanks for all your messages of support so far.

Cheers!

Read More

Chair Bound in Red Thong Bodysuit

Mina wears her tight and shiny red thong bodysuit with red heels. She is tied to the chair with rope, laced into a tight gwendoline armbinder and collared. The doxy is tied in just the right place and gets busy.

Members-Only Stream for tablets! (High Speed Internet Connection Required)


Members click here to download Video! (11:23 min / 621MB)

Members click here to download Images! (56 images)

Non-Members click here to purchase clip! (US $7.95)

Buy this clip on our Clips4Sale Store (US $12.99)

Read More

Bed Bound in Blue Catsuit

Mina wears a skin tight blue catsuit. She is tied with rope, elbows behind her, wrists at her sides and a crotch rope. She is secured to the bed one by one until she is in a tight predicament with ropes pulling on her in all directions.

Members-Only Stream for tablets! (High Speed Internet Connection Required)


Members click here to download Video! (17:56 min / 978MB)

Members click here to download Images! (77 images)

Non-Members click here to purchase clip! (US $7.95)

Buy this clip on our Clips4Sale Store (US $12.99)

Read More

Sparkly Bodysuit Hogtie

Sorry for the delay folks, we have been in Japan! Mina is wearing a silvery sparkly bodysuit which I am sure some of your recognise. She is very tightly hogtied with her arms tied back and tucked into the small of her back. This is actually quite a brutal hogite, this one is challenging for Mina every time she does it. Which means she needs more training in it! Always a challenge to get the head pulled back nice and tight with this one, definitely not much ability to roll around with it, you are pretty much stuck where you are in this tie. She needs out of the gag half way, so once I take it off, I make the hogtie even tighter to compensate for it… Well done Mina.

– A note, I think I am going to be doing more of these videos where the ties are already in place when they begin, it should be nicer overall rope work, I can take my time -and fuck up- the tie before camera rolls, and then we get into it. Personally this is the kinda stuff I prefer to watch myself, so lets see how it goes. I will still come in and change up things mid way for the most part, this one was just quite fast since it was really hard on Mina, she needs to get back into ‘rope’ shape…

Members-Only Stream for tablets! (High Speed Internet Connection Required)


Members click here to download Video! (11:08 min / 808MB)

Members click here to download Images! (77 images)

Non-Members click here to purchase clip! (US $7.95)

Buy this clip on our Clips4Sale Store (US $12.99)

Read More

Mina is Locked in Her New Cuffs Part 2

Part 2 – Mina dons our new complete cuff set and her mittens. This time she is even more tightly tied. Her elbows are slammed shut with a padlock, her harness gag is belted to her elbows pulling her head back, and her ankle cuffs are locked to her thighs. FYI the next update will drop approx 21st August.

Members-Only Stream for tablets! (High Speed Internet Connection Required)


Members click here to download Video! (5:20 min / 328MB)

Members click here to download Images! (59 images)

Non-Members click here to purchase clip! (US $7.95)

Buy this clip on our Clips4Sale Store (US $12.99)

Read More

Mina is locked In Her New Cuffs

Mina dons our new complete cuff set and her mittens. She is tightly restrained and gagged on the floor enjoying her situation. The Doxy is brought out to join in the fun, it is secured to her thigh cuffs in a way she cannot escape it.   Part 2 drops next week.

Members-Only Stream for tablets! (High Speed Internet Connection Required)


Members click here to download Video! (12:33 min / 774MB)

Members click here to download Images! (92 images)

Non-Members click here to purchase clip! (US $7.95)

Buy this clip on our Clips4Sale Store (US $12.99)

Read More

Check out our NEW COMPLETE Heavy Duty Cuff Set!

FULL Heavy Duty Leather Bondage Cuff Set. This is the whole package!

This FULL set includes:

Collar
Elbow Cuffs
Handcuffs
Bondage Belt
Thigh Cuffs
Ankle Cuffs
1 x 4-Piece Snap Hook X Connector
2 x 2-Piece Snap Hook Connectors

These cuffs are very robust, while also rather elegant and minimalist in appearance. The main cuff section is made from 4mm thick premium quality Black Latigo hide, the edges are softened for comfort. There is second, smaller strap which wraps around the cuff and buckles closed. This is the same high quality leather, though very slightly thinner. The inside is raw leather hide, though it has been polished smooth so the cuffs are comfortable, yet firm.

These items contain Stainless Steel D-Rings, Nickel Plated Buckles and Rivets.

All Items are also available separately of course!

FREE SHIPPING WORLD WIDE FOR ORDERS OVER $30USD! (Which is pretty much everything!)

Read More

Mina Returns!

We are back! Our first shoot in nearly 8 months! Mina has still got it! The time off has been great, but its time to get the updates rolling again. As for the shoot, we are getting back into the swing of things with a simple but strict session testing out the new Gwendoline Armbinder and our Facehugger Gag. Mina is wearing a sheer bodysuit under shiny PVC leggings. She is laced into the armbinder, and tightly gagged, and then hogtied tightly on the bed with her head pulled back and secured to her elbows.

Members-Only Stream for tablets! (High Speed Internet Connection Required)


Members click here to download Video! (24:11 min / 1.45GB)

Members click here to download Images! (116 images)

Non-Members click here to purchase clip! (US $7.95)

Buy this clip on our Clips4Sale Store (US $12.99)

Read More

Little bit of a status update… Get ready for new updates!

Hey Everyone!

As you all can clearly see, Mina and I have been enjoying some time off for the past 6 months from doing shoots. We had been getting a little burnt our from it all, and decided it was a good time to have a well earned break. The time off has been fairly refreshing, though we have actually spent the time working very hard to bring the order queue totally under control on our two gear stores, which are actually hugely successful, and also spent some times working on some new products which we have just added as you can see.

Restricted Senses as a whole is definitely full time work, Mina and I both spend the better part of each week working on getting orders out for the gear store, back just before we stopped and took a break in December, it was reaching a climax of stress. Orders were stacking up, we were not able to clear them for 6 whole weeks sometimes more, and then finding time to do shoots in amongst it all was getting quite stressful. To top it all off, I personally have other work too which sits on top of all of this, you can call that my day job, not something I will be leaving any time soon either. Thankfully I can already do that job from home so we find the time to make it all work!

In saying that, we feel its time to return very soon! Keep an eye out for new content, Possibly in the next couple weeks! We will not immediately promise weekly updates, but its definitely a goal, please know we will be working to produce new, fresh content, and we will be aiming to do it regularly. Restricted Senses is not going anywhere, we will be around for more years to come all things going well.

I just want to say thank you to all of you for your ongoing support through the past 5 years, all members, all customers of our stores, all of our Tumblr followers. Thanks to you all!

See you VERY soon for new content.

Matthew & Mina.

Read More

NEW Facehugger Panel Gag added to our store!

Inspired by the famous INSEX gags of old, we recreated this facehugger gag with our own spin on the design.

There is a 40mm hole in the center for the ball to show through. The straps are all high quality belt leather, there are metal eyelets on all straps, The top of the head strap has a slider on it so it can suit both male and female with varied head shapes and still be comfortable while not allowing the straps to slip off the head at all. There is also a D-Ring on the top of the gag. We are quite proud of how this one turned out.

Visit our stores to see our gear! Free world wide shipping with orders over $200USD!

Click here to check it out on the product page!

Read More

We have a brand new Armbinder!

Hey Everyone!

Due to popular demand we have added a new style!

This armbinder takes direct inspiration from the classic Ledermeister Gwendoline armbinders made famous years ago. We have taken what we learned from our current Armbinder design and integrated it into this one.

We have used an O-Ring on the top of the armbinder where the shoulder straps connect and also inserted a heavy duty D-Ring just below it, perfect for tying harness gags off to when your sub is tightly restrained.

The straps are all made with lambskin leather and are internally reinforced with cotton tape to ensure strength. We have settled on this O-Ring strap design to enable us to offer this design in our entire lambskin leather colour range, which we believe makes this armbinder the most varied design on the market!

Our armbinder has a two piece tongue which should help visually not seeing skin through the lacing when the armbinder is not fully closed.

The shoulder straps each have six snaps on them which enables the wearer, along with the numerous eyelets on the main armbinder strap to find a comfortable balance of strap tightness and comfort.

A D-Ring will also be added on the bottom of the armbinder. Eyelets will be silver in colour.

CURRENT MANUFACTURING TIMES REDUCED TO 3-4 WEEKS. We have been working super hard on getting orders out in a timely manner, for years we have been fighting order queues very deep which had long delivery times, finally we have been able to almost completely catch up and cut wait times in half!

Please visit either our main store or our Etsy Store to have a look at our available gear.

Click here to check it out on the product page!

Read More

1 2 3 16